Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roof Repair Across Pompano Beach
Roof repair in Pompano Beach usually means one of two things: either a storm peeled back shingles on the west side of town, or salt air is eating through flashing east of the Intracoastal. Most repairs we do here run between $450 and $2,800, depending on whether it’s a few tabs or a full 25% re-roof compliance job. We’re the local Creedmoor crew that shows up when we say we will, with a written price in hand before any work starts. Call (361) 320-9467 and you’ll get Travis Oakley’s team, not a voicemail queue.
Why Brennan Roofing Is Pompano Beach’s Preferred Roof Repair Company
Pompano Beach homeowners have every right to be selective about who gets on their roof. Too many have been burned by a crew that quotes one number over the phone, then “finds” extra damage once the ladder is up. That does not happen with us. The Garrison Standard means the price goes on paper before any work starts, and it does not move at the door. Every technician is background-checked, uniformed, and accountable to Travis Oakley directly. When we tell a homeowner in Cresthaven or Palm Aire what a repair will cost, that number is the number.
We carry the same discipline to every job, whether it’s a two-tab patch off McNab Road or a full storm damage response on a beachside concrete tile roof. Our 365-Day Done Right Promise is in writing: if a repair fails within one full year, we come back and fix it at no charge. No arguing, no “that’s a new issue.” One year, in writing, free return. That’s why Roof Repair calls keep coming back to us from Lighthouse Point to Margate.
Shingle Roof Repair in Pompano Beach
Shingle roof repair in Pompano Beach typically runs $350 to $850 for replacing a handful of damaged tabs, and $1,200 to $2,200 when a larger section needs to be stripped and re-shingled. The big variable here is not the shingle itself. It’s what we find underneath. On the city’s 1950s and 1960s ranch homes, it’s common to strip one layer only to find a second layer of original 3-tab underneath, and sometimes soft decking below that.
West of Dixie Highway, where much of the aging single-story concrete-block stock sits, these layered roofs are the rule rather than the exception. And here’s the thing most homeowners don’t know until the inspector shows up: under the Florida Building Code, once you touch 25% of the total roof area, the entire roof system must be brought up to current code. That includes a secondary water barrier and upgraded fastening. A cheap patch that ignores that threshold leaves you non-compliant and exposed on a future wind claim.
What a Code-Compliant Shingle Repair Includes
We strip the damaged section to the deck, replace any rotted plywood, lay down the required secondary water barrier, set architectural shingles with stainless or hot-dipped galvanized ring-shank nails, and finish with new drip edge and corrosion-rated flashing. The permit pull and final inspection sign-off are part of the job. Our crew works in Pompano Beach regularly, so the inspectors know our work and what they’re checking for.
When a Patch Is Enough Versus a Re-Roof Trigger
If a storm knocked loose six tabs on a west slope and the total damaged area stays under 25% of the roof surface, a targeted replacement is fine, though we’ll always document the repair for your insurance file. Cross that 25% line and a good contractor stops and tells you the truth: this is now a compliance job, not a patch job. We’ll show you the square count, the code threshold, and a written quote before anything gets touched.
Storm Damage Roof Repair in Pompano Beach
Storm damage roof repair in Pompano Beach runs $800 to $3,500 for most wind and water intrusion calls, depending on whether we’re replacing tabs, repairing underlayment, or addressing failed flashing around penetrations. After a named storm or even a strong afternoon thunderstorm, the most common call we get is water staining a ceiling or soffit with no obvious hole from the ground. The leak is usually at a seam, a valley, or a penetration that the wind worked open, not a missing patch of shingles.
What We Check After a Storm
We check every penetration: vent boots, pipe collars, skylight curbs, chimney flashing. On low-slope and flat built-up roofs from the 1960s and 1970s, which cover a huge portion of Pompano Beach’s original housing stock, we look for seam separation and ponding water that drove through the old tar-and-gravel. Salt-laden onshore wind east of the Intracoastal means we’re also checking for rusted standard steel fasteners that were never rated for this environment.
Rust, Salt, and Why Fastener Choice Matters Here
This is one of the biggest differences between a cheap repair and one that survives Pompano Beach. East of the Intracoastal, the wind carries salt spray onto your roof every single day. Standard electroplated steel nails and flashing will rust out within a few seasons. We use stainless or hot-dipped galvanized fasteners and corrosion-rated flashing on every east-side repair, because that’s what the coastal high-velocity wind zone requires, and because it’s the only thing that holds up.
Trusted Brands We Service in Pompano Beach
We install and repair shingle systems from GAF, Atlas, and IKO, so a Pompano Beach homeowner is getting materials with a legitimate wind-rating story behind them, not generic white-box stock. Our supplier relationships mean we can get these products into Pompano Beach quickly for a repair, which matters when you’ve got a tarp on the roof and a claim in progress. If you’ve got a 20-year-old GAF Timberline roof, a newer Atlas Pinnacle system, or an IKO Dynasty install, we’ll match the existing product when we repair it, so the roof doesn’t end up looking like a patchwork quilt.
Common Roof Repair Problems We See in Pompano Beach Homes
- Vent boot and pipe collar failures on 1960s-1970s ranch homes. The rubber boot degrades in the subtropical heat and UV, then heavy afternoon rain drives straight through the penetration. This is the single most common leak source we repair in Pompano Beach.
- Rusted flashing and fasteners east of the Intracoastal. Salt spray from the Atlantic attacks standard steel, especially around chimneys, skylights, and valley metal. We replace with corrosion-rated materials that hold up to the exposure.
- Wind-lifted shingles on west-facing slopes. Spring and summer squall lines come through hard, and the west slope takes the brunt of it. Homeowners near Cypress Creek and along McNab Road see this constantly.
- Ponding water on low-slope and flat built-up roofs. The older tar-and-gravel systems on Pompano Beach’s mid-century stock tend to hold water after a downpour, and that water eventually finds a seam or penetration. We re-secure, re-seal, and where needed add a secondary water barrier.
Pricing for Roof Repair in Pompano Beach, FL
Here’s what Pompano Beach homeowners can expect to pay for common roof repairs:
- Shingle tab replacement (minor): $250 to $450
- Vent boot or pipe collar replacement: $350 to $650
- Flashing repair (chimney, skylight, or valley): $500 to $1,200
- Storm damage repair with underlayment replacement: $900 to $2,800
- 25% re-roof compliance job on a standard ranch: $4,000 to $9,000
The two factors that move the price the most in Pompano Beach are roof age and east-of-Intracoastal exposure. Old layered shingles mean more stripping and deck repair. Salt-laden wind on the east side means upgraded fasteners and flashing, which cost more than the standard materials but are non-negotiable for code compliance. We give every homeowner a written line-item price before we begin, and that price does not change unless you approve additional work in writing first.
We Also Serve Cities Near Pompano Beach
Our crews cover Pompano Beach and the surrounding cities, including Coconut Creek, Margate, Deerfield Beach, and Fort Lauderdale. If you’re in one of those areas and need roof work, the same Garrison Standard applies: written pricing, background-checked technicians, and a one-year written guarantee. Call (361) 320-9467 and a live person will answer, whatever the hour.
Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Pompano Beach
It can, and most homeowners don’t realize it until the inspection. The Florida Building Code says once you replace 25% or more of the total roof area, the entire roof system must be brought to current code with a secondary water barrier and upgraded fastening. That threshold is applied by Pompano Beach’s own coastal high-velocity wind zone overlay, so a repair that starts as “just a few tabs” can cross the line. We count squares first and tell you where you stand before we quote. Call (361) 320-9467 for an honest assessment.
East of the Intracoastal, the high-velocity wind zone and salt-laden onshore winds require stainless or hot-dipped galvanized fasteners and corrosion-rated flashing. Those materials cost more than standard steel, but they’re mandatory for code compliance and they’re the only thing that survives the salt exposure. West of Dixie Highway, the same job usually costs less on materials but often involves stripping multiple layers of old 3-tab shingle down to the deck, which adds labor.
In Pompano Beach, your roof has to meet a wind rating under the Florida Building Code that accounts for the city’s position in a hurricane-prone coastal zone. Shingle repairs and replacements need to be installed to withstand at least 130 mph uplift in the high-velocity wind zone east of the Intracoastal, and materials must be fastened per the manufacturer’s wind-rated installation instructions. That means the right nail pattern, the right nail type, and a starter strip. We install GAF and Atlas systems that carry tested wind ratings and we document every step for the permit file.
Yes. When a Pompano Beach homeowner files a wind claim after a storm, the adjuster wants proof the roof was compliant with the Florida Building Code at the time of the damage. A documented permit, a final inspection sign-off, and a written description of the materials and fasteners we used is exactly what they’re looking for. Our crew was called to a 1968 concrete-block ranch off NE 26th Ave near Cypress Creek where a storm had peeled back three tabs on the west slope and water had started staining the soffit. We found two older shingle layers and soft decking, so per the 25% re-roof uplift trigger we stripped to the deck, replaced the damaged plywood, laid a secondary water barrier and new ice and water shield in the valleys, then set GAF architectural shingles with a starter strip and stainless ring-shank nails to hit the coastal wind rating. The homeowner got a documented permit and inspection sign-off that the adjuster accepted without the usual back-and-forth.
A compliant quote from a Pompano Beach roofer should include the square count of the damaged area, the 25% threshold calculation against your total roof area, the specific fastener type (stainless or hot-dipped galvanized), corrosion-rated flashing, the secondary water barrier if required, and the permit and inspection fees. A cheap quote that only covers visible tabs skips every one of those and leaves you exposed to a denied or reduced wind claim. If the number on paper doesn’t include those items, walk away. Then call our Roof Repair team at (361) 320-9467 for a real quote.
If your roof is leaking, wind-damaged, or just due for a real inspection, call Travis Oakley and the Brennan Roofing crew at (361) 320-9467 for a free, written estimate. We serve all of Pompano Beach, from Collier City to the barrier island, and every job is backed by the 365-Day Done Right Promise in writing.
Written by Travis Oakley, Owner at Brennan Roofing, serving Pompano Beach and the surrounding cities.