Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roofing Company Across Margate
Most roofing work in Margate costs between $450 and $1,850 for repairs, while full replacements on the city’s mid-century ranch homes typically run $11,500 to $22,000 depending on the roof type and code requirements. That’s the honest range, and we’ll put your exact number in writing before any work starts. Our crews know Margate’s 1960s and 70s concrete-block ranches, the low-slope roofs that dominate neighborhoods off Royal Palm Boulevard and State Road 7, and the High-Velocity Hurricane Zone rules every roof here has to meet. Call (361) 320-9467 and a live person answers, day or night.
Why Brennan Roofing Is Margate’s Preferred Roofing Company
Margate homeowners don’t call us because we’re the cheapest bid. They call because the price we quote is the price on the invoice, and because the crew that shows up is background-checked, uniformed, and working under The Garrison Standard. Founded in 2000 as part of the Garrison Partners family, Brennan Roofing operates each location independently to the same written rules: price on paper before any work begins, a live person on the phone around the clock, and a 365-Day Done Right Promise on every repair and installation.
We know what Margate’s building code actually demands, and we know what happens when a roofer ignores it. Travis Oakley, who leads our team, insists on product approvals listed on every quote so homeowners can verify compliance themselves. When we install a roof in Margate, it’s built to the standard the inspector checks, not the one that makes a bid look cheap.
Residential Roofing in Margate
Residential Roofing in Margate is mostly about the city’s stock of single-story concrete-block ranches built from the 1960s through the 1980s. Many still carry original low-slope or flat roofs, often gravel-surfaced built-up systems or modified bitumen, and nearly all of them fall short of current wind-uplift requirements. A full replacement here usually means tear-off, deck inspection, a secondary water barrier, mechanically fastened membrane or shingle system, and a final inspection that verifies HVHZ compliance.
Flat and Low-Slope Roof Replacement
Margate has an unusually high concentration of flat roofs for a Broward city. Older built-up roofs with gravel surfacing often hide water-saturated insulation and rusted fasteners until the next heavy rain finds the seams. We install mechanically attached single-ply systems like GAF EverGuard TPO with peel-and-stick secondary water barriers under them, because that’s what the code here requires and what stops seam leaks after a tropical storm.
Asphalt Shingle Roofs
Shingle roofs on Margate homes need enhanced fastening and a sealed roof deck to pass the current wind-uplift schedule. We use Atlas and Tamko shingle lines that carry current Florida Product Approvals, and we document every fastening pattern so the wind mitigation report reflects what was actually installed. That documentation is what turns a new roof into a lower insurance premium at renewal.
Roof Maintenance in Margate
Roof Maintenance in Margate isn’t optional, not with the UV load and the volume of water a summer storm can drop in an hour. We recommend a documented inspection every two years and after any named storm that passes close enough to push wind into the roof system. Small issues on a Margate roof, like a cracked pipe boot or a lifted seam on a flat roof membrane, become interior water damage faster than homeowners expect.
Wind Mitigation Inspections
A wind mitigation inspection documents what your roof fastening and secondary water barrier actually do. Margate homeowners can take that report to their insurer and often see a real premium reduction, but only if the roof was installed with the right products and the paperwork matches the job. We provide that documentation when we complete a compliant roof.
Storm Season Preventative Checks
Before hurricane season, we walk the roof, check flashing and drip edge, clear drains on flat sections, and tighten anything that’s loosened over the year. The point is to find the weak seam before a named storm finds it for you. We write up what we see with photos and plain English explanations, and the price to fix anything we find gets put in writing before work starts.
Trusted Brands We Service in Margate
We install and service materials from GAF, Atlas, and Tamko, and we stock the local fastening and flashing components that Margate’s HVHZ code requires. When a homeowner asks what the difference is between one manufacturer line and another, we explain it from the deck up: what’s approved for this zone, what holds up under UV, and what makes sense on a low-slope ranch roof versus a shingle gable. Your choice goes on the written quote with the product approval number next to it, so there’s no guessing at inspection time.
Common Roofing Company Problems We See in Margate Homes
- Original 1960s flat roofs failing at the seams. Older built-up gravel roofs weren’t mechanically attached to today’s uplift schedules, so water finds the seams and flashing after heavy rain. A quick patch buys time; a proper tear-off with a secondary water barrier is the fix that lasts.
- Quotes that swap out HVHZ-approved membranes for standard products. If the bid doesn’t list a Miami-Dade or Florida Product Approval number for the membrane and fastening schedule, it’s probably not a compliant roof. Homeowners who don’t know to ask for that number end up with a roof that passes a visual but fails the next wind event.
- Storm leaks on flat roofs that looked fine before the storm. Margate’s flat roofs hide seam separations and rusted fasteners until wind-driven rain exposes them. After a tropical storm, we see emergency calls from homeowners in the Oriole and Margate Estates areas whose roofs were never mechanically attached to current code.
- Missing wind mitigation documentation. A homeowner pays for a code-compliant roof but never receives the paperwork that proves it, so insurance never applies the credit. We hand over that documentation with every completed re-roof, because it’s part of the job, not an upsell.
Pricing for Roofing Company in Margate, FL
Repairs in Margate run from $450 for a small flashing or pipe-boot fix up to $1,850 for larger seam repairs or section replacements on flat roofs. Full replacements on the city’s ranch homes start around $11,500 for a smaller shingle roof and reach $22,000 or more for a flat roof tear-off with secondary water barrier, mechanically fastened membrane, and new drip edge. What moves the number: roof type, deck condition after tear-off, whether the home has original 1960s framing that needs fastening upgrades, and the product approval requirements baked into Margate’s HVHZ code. We don’t give verbal ballparks and shift them at the door. We put the number on paper before any work starts, and it doesn’t move. Call (361) 320-9467 for a written quote.
We Also Serve Cities Near Margate
Our Roofing Company crews work throughout Margate and the neighboring Broward communities of Coconut Creek, Coral Springs, Pompano Beach, and Plantation. The code boundary matters: Margate sits inside the HVHZ, and Coral Springs does not, so we quote each city to its actual requirement. Scheduling for Roofing Company in Margate runs through our Miami (South FL) office, with local crews dispatched to Margate jobs directly.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roofing Company in Margate
Yes. Margate sits inside Broward’s High-Velocity Hurricane Zone, so every roofing product and fastening schedule used here must carry a current Miami-Dade or Florida Product Approval (NOA). Coral Springs falls outside the HVHZ boundary, which means a cheaper quote from a roofer based there may simply be listing products that were never approved for Margate. Call (361) 320-9467 and we’ll show you the approval numbers on our quote.
A compliant quote lists the specific membrane or shingle product with its Florida Product Approval number, the fastening schedule, the secondary water barrier, and the inspection steps for the HVHZ. If a quote doesn’t show those line items, ask why. Our written quotes include each of these before any work starts.
Yes, because a documented wind mitigation report proves the roof’s fastening and secondary water barrier meet current uplift standards. The credit only applies if the roof was installed to those standards and the paperwork matches the installation, which is why we provide the documentation with every compliant roof in Margate. Call (361) 320-9467 to talk through what your roof qualifies for.
A tear-off on a 1960s Margate flat roof means removing the old gravel or built-up membrane down to the deck, inspecting for saturated insulation or rusted fasteners, installing a peel-and-stick secondary water barrier, mechanically fastening a new approved membrane to the current HVHZ schedule, and replacing every penetration boot and the drip edge. Most take two to four days depending on size and deck condition. Call (361) 320-9467 for a written estimate of what your specific roof will cost.
Because the older membranes weren’t mechanically attached to meet current wind-uplift requirements, so wind-driven rain gets under seams and flashing that flex during a storm. The roof looks dry until the next heavy rain finds the separation, which is when the leak shows up inside. A proper mechanically fastened replacement with a secondary water barrier stops that failure mode for good.
Call Brennan Roofing at (361) 320-9467 for a written estimate on any roofing work in Margate. A live person answers. The price goes on paper before work starts, and every job carries the 365-Day Done Right Promise in writing for one full year.
Written by Travis Oakley, Owner at Brennan Roofing, serving Margate under The Garrison Standard.






Before
After
Before
After
Before
After