Boral Roofing Company Nationwide

Boral Roofing Company in Los Angeles: What to Know First

Boral roofing company work in Los Angeles typically costs $350 – $2,800 depending on whether we’re replacing cracked tile, rebuilding flashing, or repairing the underlayment beneath a failed section. As an independent Boral service provider, Brennan Roofing sends a background-checked technician to diagnose the problem, put the price on paper, and complete most repairs in a single visit. We’re not a Boral warranty contractor and we don’t pretend to be. What we are is a local crew that has pulled apart enough Boral roofs across Los Angeles to know exactly where they fail and what it takes to fix them right the first time. If you own a Boral roof and something looks wrong, call (361) 320-9467 and we’ll walk you through what you’re seeing before we ever send a truck.

Call (361) 320-9467

How Boral Products Fail – and How We Fix Them

• Boral concrete tile surface spalling in coastal Los Angeles zones. Homes west of the 405, from Playa del Rey up through Pacific Palisades, get years of salt-laden morning fog sitting on the tile. That moisture works into the concrete surface and causes spalling, where the top layer flakes off in thin sheets. We see it most on Boral Barcelona and Boral Villa roof tile profiles. The fix isn’t always a full replacement. If the spalling is cosmetic and the tile still sheds water, we replace only the damaged tiles and reseal the surrounding field.
• Broken tile from foot traffic on Boral flat-profile lines. Boral’s flat concrete tile profiles, including the CedarLite series, don’t forgive sloppy foot traffic. A homeowner with a satellite installer or a pest-control tech walking the ridge line can crack tiles that looked fine from the ground. The real problem is that a cracked Boral tile doesn’t always leak immediately. It lets water sit against the underlayment, which rots over time. We don’t just swap the broken tile. We lift the surrounding tiles, inspect the underlayment beneath, and only close it back up when we know the decking is still sound.
• Roof-to-wall flashing failures on Boral tile installations. Most leaking Boral roofs in Los Angeles aren’t leaking through the tile at all. They leak where the roof meets a stucco wall or a chimney. The original flashing gets old, the mortar cap cracks, and water finds the gap. We rebuild those transitions with new metal flashing and correct counterflashing, and we replace the mortar cap with a proper sealant detail. This is the most common repair we do on Boral roofs in the San Fernando Valley, where stucco siding meets tile on nearly every home.
• Valley metal corrosion on older Boral installs. Boral tile roofs built in the 1990s and early 2000s across Los Angeles often used thinner valley metal than we’d install today. After twenty-plus years of wet winters and July sun, that valley metal rusts through and leaks into the attic before the tile above it shows any damage. When we find corroded valley metal on a Boral roof, we replace the metal, relay the tile, and preshape the new valley so water moves through it without pooling.
• Underlayment failure on Boral roofs over 25 years old. The tile on a Boral roof can look perfectly fine while the underlayment beneath it has turned to paper. This is the hidden failure homeowners don’t catch until the ceiling stains show up. In Los Angeles neighborhoods like Sherman Oaks, Studio City, and Encino, we regularly find original felt underlayment from the 1980s and 1990s that’s dried out and torn. When that’s the case, the honest call is a full lift-and-relay: remove the Boral tile, replace the underlayment and battens, and put the same tile back down. It costs more than a patch, but it’s the repair that actually lasts.

Our Boral Roofing Company Process

1. 1
   You call, you get a live person. No voicemail, no call center. We answer, ask what you’re seeing, and schedule a visit at a time that works.
2. 2
   We inspect the roof. Travis Oakley still pulls his own inspections on most Boral jobs. We walk the roof, identify the failure point, and photograph everything so you can see what we see.
3. 3
   We write the price down. Before any work starts, you get a written price for the repair. That number doesn’t move at the door, and it doesn’t move once we start pulling tile.
4. 4
   We decide on parts together. On a Boral repair, we explain whether the right call is a matching Boral tile, a quality aftermarket equivalent, or a repair that doesn’t need new tile at all. You approve the decision before we spend a dollar of your money.
5. 5
   We do the repair and test it. After the fix, we water-test the repair area and check the surrounding tile, flashing, and underlayment for anything else waiting to fail.
6. 6
   You get it in writing. Every Boral repair we do in Los Angeles comes with our 365-Day Done Right Promise. If the repair fails within one full year, we come back and make it right at no charge. In writing, not as a handshake.

What Boral Roofing Company Costs in Los Angeles

Here are real price ranges for the Boral work we do most often in Los Angeles:

• Single tile replacement: $350 – $600
• Flashing repair at a wall or chimney: $550 – $1,400
• Valley metal replacement: $900 – $2,200
• Underlayment repair under a small section of tile: $1,200 – $2,800
• Full lift-and-relay with new underlayment: $8,000 – $15,000 depending on roof size and tile condition

What moves the price is access, roof pitch, and what we find once the tile comes off. A two-story Boral roof on a hillside lot in Mount Washington costs more to work on than a single-story ranch in Burbank. We write the price before work starts, so you’ll never get a surprise change order mid-job. Call (361) 320-9467 for a free estimate on your Boral roof.

Why Los Angeles Homeowners Call Brennan Roofing for Boral Work

A roof that’s squared away doesn’t need a sales pitch. That’s the whole reason Brennan Roofing exists. We don’t compete on the lowest bid, and we don’t send a salesman to your door with a binder of financing options. We send a background-checked, uniformed technician who will tell you if the repair is worth doing or if you’d be better off putting that money toward a replacement. Every Boral job we take in Los Angeles gets a written price before any work starts, and every repair carries the 365-Day Done Right Promise. If it fails within a year, we come back free. That’s The Garrison Standard, and it’s the same on a $400 tile replacement as it is on a full roof. We also work with GAF, Owens Corning, and CertainTeed materials, so if a Boral roof is beyond repair, we can show you what a replacement actually costs with options that make sense for your house.

FAQs