Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roofing Company Across Colton
Roofing work in Colton usually runs from $450 for a targeted repair up to $18,000+ for a full replacement on a larger home, and we put that number in writing before any work starts. If you’re off Rancho Avenue, up near the La Cadena corridor, or over by the 10 freeway and looking at a roof that’s been baked by Inland Empire summers, you need a crew that knows what Colton roofs actually deal with. Not just heat and wind. Dust. Old framing. Permitting that changes street by street. Call Brennan Roofing at (361) 320-9467 and we’ll have a background-checked technician out to look at it.
Why Brennan Roofing Is Colton’s Preferred Roofing Company
Homeowners in Colton tend to be skeptical of roofers, and for good reason. Half the bids they get come from outfits that quote from the street, never walk the property, and then “discover” problems after the tear-off starts. Our approach is different and it starts with The Garrison Standard: a written price before any work begins, a uniformed technician who shows up inside the promised window, and a one-year written guarantee on every job. That’s the same standard on a $500 repair in Grand Terrace as it is on a $22,000 re-roof off Washington Street.
We’re part of the Garrison Partners family, founded in 2000, but this location is independently owned and operated. Travis Oakley runs the crews that serve Colton, and he’s the one who answers when a homeowner has a question about flashing or underlayment. Our phones are answered by a live person around the clock. Not a voicemail. Not a callback queue. You call, a person picks up. That matters at 6 a.m. when you’re staring at a water stain on the ceiling and need to know if it’s an emergency or can wait until Monday.
Colton homeowners have told us the same thing for years: they don’t want the cheapest bid, they want a roofer who shows up when he says he will, keeps the jobsite clean, and stands behind the work. That’s what The Garrison Code is. Every technician on your roof has passed a background check, wears a uniform, and works to a standard that doesn’t change depending on which side of town you live on.
Metal Roof Installation in Colton
Metal Roof Installation in Colton is what we recommend most often for homeowners who plan to stay in their house for another 20 years and don’t want to think about shingles again. A standing seam metal roof on a typical Colton ranch home runs $14,000 to $24,000 installed, depending on panel gauge, seam profile, and how much of the old roof has to come off first. That price includes new underlayment, drip edge, and a written guarantee for one full year under the 365-Day Done Right Promise.
Metal makes sense in Colton for specific reasons. The 100-degree summer heat breaks down asphalt shingles faster here than almost anywhere else in the Inland Empire. Santa Ana winds in October and November rip at loose ridge caps and flashing. A properly installed metal roof sheds both of those problems, and it reflects enough heat to take real load off your AC.
Standing Seam on Ranch Homes
Most Colton homes built between the 1950s and 1970s have low-slope or nearly flat ranch rooflines. Standing seam panels handle those slopes well, but the roof deck underneath has to be solid. We check every sheet of plywood or skip sheathing before we install. If the decking is compromised, we say so and the price moves before work starts, not after.
Metal Over Shingles – When It Works
In some cases you can install metal over a single layer of existing composition shingle. That saves on tear-off cost and keeps old material out of the landfill. But on south Colton homes with cement-kiln dust worked into the old shingle surface, we recommend a full tear-off. You don’t want that dust trapped under a new metal roof, abrading the panels from underneath for the next 30 years.
Residential Roofing in Colton
Residential Roofing in Colton covers everything from a small leak repair on a 1920s bungalow near downtown to a complete re-roof on a 1960s tract home off Mount Vernon Avenue. Most full replacements on the mid-century ranch homes that dominate Colton’s housing stock run $9,000 to $16,000 for architectural composition shingles, including tear-off, new underlayment, new flashing, and a full-year written guarantee. Larger homes with complex roof geometry or multiple layers to remove push toward $20,000 and beyond.
What changes the price is what we find under the shingles. Colton homes from this era were built with wood framing that’s now 50 to 70 years old. We’ve opened roofs and found dry rot at the eave line, termite damage along the fascia, and decking so dried out it splinters under the nail gun. You don’t want a roofer who ignores that and lays new shingles over it. You want one who shows you photos, explains what’s needed, and puts the revised scope in writing before proceeding. That’s how we work.
Full Tear-Off and Re-Deck
When a Colton home is on its second or third shingle layer, or the decking has been softened by decades of heat and occasional roof leaks, a full tear-off is the honest answer. We strip to the framing, inspect every rafter tail, replace compromised decking, and install new ice and water shield at the eaves before the new shingles go down. It’s more work up front. It’s also the only way to know what’s actually under there.
Repair vs. Replace on Older Homes
Not every Colton roof needs replacing. If the decking is solid and the leak is isolated to a failed pipe boot or a section of flashing, a targeted repair for $450 to $900 often buys you several more years. We’ll tell you straight if replacement is the smarter money, and we’ll show you why on the ladder, not just in words. The decision stays yours.
Trusted Brands We Service in Colton
We install materials from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, and we stock common shingle colors and metal panel profiles locally so Colton customers aren’t waiting on a regional warehouse. For Colton’s heat and Santa Ana wind exposure, we typically spec GAF Timberline HDZ architectural shingles or Atlas Pinnacle Pristine as our starting point, both of which carry strong wind ratings and hold up to intense UV. We don’t push one brand. We explain what each line costs, what it’s rated for, and what we’d put on our own house in your neighborhood.
Common Roofing Company Problems We See in Colton Homes
- South Colton cement dust in valleys and vents. Fine grey dust from the old CalPortland plant settled on south-side roofs for decades and worked into valleys, pipe penetrations, and soffit vents. We see it on nearly every tear-off south of the 10. It has to be bagged and removed before new materials go down, or it keeps abrading the new shingle surface and clogging ventilation.
- Santa Ana wind damage at ridge caps and flashing. Colton sits in a wind corridor that funnels through the Cajon Pass. Every fall we get calls about ridge cap shingles peeled back and flashing lifted at the chimney or roof-to-wall intersections. The usual cause is underdriven nails, and the fix is resecuring with proper fasteners and adding sealant at every penetration, not just the obvious ones.
- Dried-out decking on 1950s-1970s ranch homes. The original roof decks on Colton’s mid-century tract homes were built with materials that don’t hold fasteners as well after 60 years of 100-degree summers. We test every deck before we quote a replacement, because a roofer who prices from the street won’t know until the shingles are already in the dumpster.
- Wrong permitting jurisdiction on acreage properties. Some Colton-area parcels sit in unincorporated San Bernardino County territory, even though the mailing address says Colton. We’ve seen homeowners get a roofer’s quote based on city permitting, only to find out mid-project that the county has jurisdiction and different requirements. We check the parcel before we quote.
Pricing for Roofing Company in Colton, CA
For planning purposes, here’s what Colton homeowners should expect. A small roof repair, pipe boot replacement, or localized flashing fix runs $450 to $900. A full roof replacement on a typical 1,200 to 1,800-square-foot ranch home with architectural shingles runs $9,000 to $16,000, including tear-off of the existing roof and new underlayment. Metal roof installation runs $14,000 to $24,000 depending on panel profile and roof complexity. Tile repair or re-bedding of ridge caps runs $600 to $2,000 and tile replacement on a full roof is quoted per square foot after inspection. Several factors move the final number: whether the south Colton dust remediation line item applies, whether the decking needs replacement, how many layers come off, and whether your parcel is county or city jurisdiction. We give the written price before any work starts, always, and it doesn’t move at the door. Call (361) 320-9467 to schedule a free estimate.
We Also Serve Cities Near Colton
Our crews serve Colton and the surrounding communities including Grand Terrace, Loma Linda, Riverside, and San Bernardino. If you’re in one of those cities and have been looking for a Roofing Company that writes the price before work starts, the same Garrison Standard applies. We coordinate dispatch from our Inland Empire office and run Colton jobs with local crews who know the area.
Serving Colton, CA - Our Local Coverage Area
We’re based in the Colton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roofing Company in Colton
Yes, in most cases you do. South Colton roofs, especially south of the 10 freeway and along the old rail corridor, often carry a fine grey cement-kiln dust residue from the former CalPortland plant. It settled into shingle granule surfaces, valleys, and vents over decades and was addressed under a federal Superfund cleanup, but many roofs still have it. We include dust containment and bagged disposal as a line item on tear-offs in that part of the city, because laying new roofing material over that dust shortens its life. Call (361) 320-9467 and we’ll tell you if it applies to your roof before you commit to anything.
It depends on the parcel, and this is one of the most common ways Colton-area roofing projects go sideways. Some addresses that say “Colton” are actually in unincorporated San Bernardino County territory, which means the county, not the city, has permitting jurisdiction. We check the parcel’s jurisdiction before we quote, so the permit is pulled from the correct agency the first time. That avoids a mid-project stop-work order and a revised scope. If you’re on acreage with a detached shop or ADU, we’ll confirm jurisdiction for every structure on the property, not just the house.
They don’t change the roofing work itself, but they can change access and material staging. On Colton-area acreage properties, septic leach fields and wellheads have setback requirements that limit where we can place a dump trailer or material storage during the job. We scope access before quoting, so the dump location is legal and the work doesn’t disturb your septic system or well. It’s a planning step most roofers skip, and it’s why a disciplined walkthrough matters more than a low ballpark number. Call (361) 320-9467 for a free estimate that accounts for your actual site.
Ask three questions. First, is the price in writing before any work starts, and does it hold? Second, does the quote include dust containment on south-side Colton roofs, or is that an “unexpected condition” they’ll bill for later? Third, what does the warranty say in writing, for how long, and will they come back for free if a repair fails? At Brennan Roofing the answer to all three is the same every time: written price first, dust line item included where the parcel warrants it, and a 365-Day Done Right Promise in writing for one full year with a free return visit at no charge if work fails within that period. If another roofer won’t answer those three questions on paper, keep looking.
Yes, and for Colton specifically, metal is one of the strongest choices you can make. A properly installed standing seam metal roof with mechanically seamed panels and correctly torqued fasteners holds up to Santa Ana winds far better than composition shingles at the ridge and eave edges. The 100-degree summer heat also doesn’t degrade metal the way it degrades asphalt granules, and reflective metal panels reduce heat gain into the attic. The key word is “properly installed.” Poor metal installation fails at the seams and fasteners, which is why we put a full year of written guarantee behind every metal roof we install in Colton. Call (361) 320-9467 for pricing on your roofline.
If your roof in Colton needs an honest assessment, call Brennan Roofing at (361) 320-9467. We’ll schedule a free estimate, walk the property with you, and put the price on paper before anything gets touched. Travis Oakley runs the crews that serve Colton, and the standard doesn’t change from one street to the next.
Written by Travis Oakley, Owner at Brennan Roofing, serving Colton and the surrounding Inland Empire communities.






Before
After
Before
After
Before
After