Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roofing Company Across Fountainebleau
Roofing Company service in Fountainebleau means dealing with three forces at once: brutal afternoon thunderstorms off the Everglades, salt-laden air pushing in from Biscayne Bay, and a housing stock built mostly between 1975 and 1985 that’s now hitting the end of its original roof life. We’re Brennan Roofing, and our Roofing Company crews have worked these flat-roof subdivisions long enough to know that the difference between a roof that lasts and one that fails early here comes down to materials specified for salt and standing water, not just labor. If your roof is leaking or your insurance inspector flagged the assembly, call (361) 320-9467 and we’ll put a written price in your hand before any work starts.
Why Brennan Roofing Is Fountainebleau’s Preferred Roofing Company Company
We run on a standard, not a sales pitch. Every job in Fountainebleau starts with a written price before any work begins, and that price does not move at the door. Our technicians are background-checked, arrive in uniform, and work under The Garrison Standard, the same operating discipline we apply on every roof we touch. No exceptions.
Homeowners in this part of Fountainebleau have told us the same story for years: a roofer shows up late, quotes one number, then “discovers” problems after tear-off and the price climbs. We don’t work that way. The price goes on paper first. If the scope changes, we talk about it before we touch it. That’s the Garrison Code.
We also answer the phone with a live person, 24/7. No voicemail, no callback queue. When a Fountainebleau homeowner calls about a leak after an Everglades-edge storm, a real person picks up and starts the dispatch.
Roof Maintenance in Fountainebleau
Roof Maintenance in Fountainebleau is largely about managing what the climate throws at a low-slope or flat assembly: pooled water after heavy rain, UV degradation of coatings and sealants, and salt corrosion working on flashing and fasteners year-round. A homeowner here should expect to have their roof inspected and maintained at least twice a year, with extra attention after hurricane season. We typically see maintenance work in Fountainebleau run $280 – $650 for cleaning drains and scuppers, resealing penetrations, replacing damaged flashing, and touching up roof coating on flat sections.
Drainage and Scupper Cleaning
Flat roofs on the 1970s and 1980s concrete-block homes around Fontainebleau Boulevard and the subdivisions west of it depend on scuppers and interior drains to move water off the deck. When debris clogs them, water ponds and works into seams. We clear drains, check slope, and flag low spots that hold water longer than 48 hours.
Fastener and Flashing Inspection
Salt air from Biscayne Bay accelerates rust on carbon-steel fasteners and flashing. During a maintenance visit, we check termination bars, drip edge, and pipe boot fasteners for pitting and replace what’s failing before the membrane around it tears.
Roof Coating in Fountainebleau
Roof Coating in Fountainebleau is the most cost-effective way to extend the life of an aging flat roof without a full tear-off, but only if the coating is specified for this environment. We use elastomeric and silicone coatings from manufacturers including GAF and CertainTeed, applied at the right mil thickness to reflect UV and seal hairline cracks. Typical coating work on a Fountainebleau flat roof runs $1,800 – $4,500 depending on square footage and surface prep.
When Coating Is the Right Call
A 1982 concrete-block ranch with minor alligatoring on the surface and no structural deck damage is a strong coating candidate. The old coating gets pressure-washed, primed, and recoated. That buys real time and restores reflectivity, which also cuts attic heat load during summer.
When Coating Won’t Fix the Roof
If water has been ponding at the same low spot for years, or if the deck has rot at the fastening line, coating just buries the problem. We will not coat over failed drainage or rusted fasteners. We fix those first, or we tell you the roof needs replacement. Honesty is part of the standard.
Trusted Brands We Service in Fountainebleau
We install and maintain roofing systems from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. For Fountainebleau’s flat-roof stock, we often recommend GAF or CertainTeed modified bitumen and silicone coating systems because they hold up well to the UV and ponding conditions we see here. For the barrel-tile and shingle accents on many of these 1970s and 1980s homes, Atlas, Tamko, and Boral offer profiles that match the original look without fighting the insurance inspector. We keep common flashing, termination bar, and sealant stock in our local trucks so Fountainebleau jobs don’t stall waiting on a parts run.
Common Roofing Company Problems We See in Fountainebleau Homes
- Ponding water on low-slope flat roofs. The combination of flat roof geometry and Fountainebleau’s heavy summer downpours means water sits on decks longer than it should. Standing water breaks down coatings and eventually finds seams and fasteners.
- Rusted carbon-steel fasteners and flashing. Salt-laden air from Biscayne Bay pits the original hardware on these 1970s and 1980s roofs. We regularly find fasteners that have rusted through while the membrane above them still looks intact.
- Failed termination bars and unsealed penetrations. Wind-driven rain tracks under the wall line at poorly sealed termination points. On older Fountainebleau homes, the original sealant has long since chalked and cracked.
- Coating failure over unfixed drainage. We see roofs that were coated without addressing ponding, and the coating blistered within two seasons. A coating is only as good as the drainage beneath it.
Pricing for Roofing Company in Fountainebleau, FL
Roof repair in Fountainebleau typically runs $350 – $900 for targeted fixes like flashing replacement, seam repair, or fastener replacement. Full flat-roof coating runs $1,800 – $4,500. Full replacement of a flat or low-slope roof on one of these 1970s – 80s homes generally lands between $9,000 and $18,000 depending on square footage, deck condition, and whether you’re upgrading to a coastal-spec fastener and flashing package. The coastal-spec upgrade adds roughly $800 – $1,800 to a typical job, and we’ll explain exactly why below. Every price goes in writing before any work starts. Call (361) 320-9467 for a free estimate.
We Also Serve Cities Near Fountainebleau
Our crews work throughout Roofing Company in Fountainebleau and the surrounding South Florida communities. We regularly dispatch to Miami, Hialeah, Fort Lauderdale, and Pembroke Pines, so if you’re just outside the neighborhood, give us a call and we’ll confirm coverage.
Serving Fountainebleau, FL - Our Local Coverage Area
We’re based in the Fountainebleau area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roofing Company in Fountainebleau
Yes, it absolutely does. Salt-laden air from Biscayne Bay accelerates corrosion on standard carbon-steel fasteners and aluminum flashing. On coastal-spec jobs we specify stainless or hot-dip galvanized fasteners, marine-grade finishes, and fully sealed termination bars at every penetration. The standard inland hardware costs less up front but fails at the fastening line within a decade. Call (361) 320-9467 and we’ll show you the difference in writing before you decide.
Because Fountainebleau sits on the Everglades edge, afternoon thunderstorms build faster and hit harder than they do closer to the coast. We schedule open-deck work at first light so membranes are sealed before the typical 2 p.m. downpour. Uncovered decking in a Fountainebleau storm means water inside the house, so we treat the afternoon storm cell as a hard stop. It’s a scheduling discipline most roofers here don’t bother with, and it’s one of the reasons our jobs stay dry.
That depends on the deck, and we’ll inspect it before we quote. If the deck is solid and the problem is surface cracking and UV wear, coating usually extends the roof’s life and costs $1,800 – $4,500. If the deck has rot, rusted fasteners, or ponding that has been ignored, replacement is the honest answer. We don’t coat over failed drainage. Call (361) 320-9467 and we’ll tell you which path your roof actually needs.
The coastal-spec package with hot-dip galvanized or stainless fasteners, marine-grade flashing, and sealed termination bars typically adds $800 – $1,800 to a flat-roof replacement or major repair in Fountainebleau. The cheap spec saves money up front and fails at the fastening line within a decade. We quote the coastal spec as our default here because the salt air here will find the cheap hardware.
Yes. The sloped barrel-tile and shingle sections need a high-quality underlayment with proper overlap and sealing, while the flat sections need a full membrane system designed for low-slope ponding. We inspect both parts separately because they fail in different ways. Call (361) 320-9467 for a free estimate and we’ll walk your roof with you.
What Separates Our Approach in Fountainebleau
Because Fountainebleau sits on the Everglades edge, our afternoon storms build faster and hit harder than they do over in Coral Gables or the Beach. That shapes how we schedule work. We run flat-roof tear-off and coating crews at first light and treat any 2 p.m. thunderstorm cell as a hard stop on open decking. It’s a small discipline that prevents big water damage.
On a 1978 concrete-block ranch off Fontainebleau Boulevard with the original tar-and-gravel flat roof, we stripped down to decking, found rusted carbon-steel fasteners and ponding toward the rear scupper, and re-specified hot-dip galvanized fasteners, a tapered insulation crickets system, and fully sealed termination bars at every penetration. Two seasons of Everglades-edge downpours later, the customer’s ceiling stains never came back and the roof passed the insurance inspection that had been flagged on the old assembly.
That’s the difference between the coastal spec and the inland spec. The cheap version of that roof would have reused the original fasteners and flashing, saved maybe $1,200 up front, and failed within a decade. Reusing the original carbon-steel hardware on a 1970s Fountainebleau flat roof is a slow-motion failure: the salt air has already pitted the metal, so the new membrane gives out at the fastening line. We specify stainless and hot-dip hardware as the default here because the environment demands it.
Cheap aluminum drip edge and unsealed paver-fence post bases chalk and corrode in year-round UV and salt air, leaving open joints where wind-driven rain tracks back under the wall line. We seal those joints properly and use marine-grade finishes on exposed metal. And we never coat a low-slope roof before fixing the drainage that caused the ponding in the first place. A coating that looks good for one season and then blisters because water still stands at the same low spot after every storm is a waste of your money. So is skipping the drainage fix.
Every job Brennan Roofing does in Fountainebleau is backed by the 365-Day Done Right Promise, in writing, for one full year. If a repair or installation fails within that period, we come back at no charge. No fine print, no runaround. Travis Oakley runs this operation under that standard, and every technician on your roof is background-checked and in uniform. You know exactly who is on your property.
We also carry a full-year written guarantee on every job, source materials from GAF, CertainTeed, and Owens Corning among others, and put the price on paper before any work starts. If you’re looking for a roofing company in Fountainebleau that treats the salt air and the storm schedule as the real problems they are, call (361) 320-9467 for a free estimate.
Written by Travis Oakley, Owner at Brennan Roofing, serving Fountainebleau under the Garrison Standard.