Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roofing Company Across Madera
Roofing work in Madera usually means one of three things: a full replacement on a 1920s-50s home with layers of old shake, a repair after the first winter rain finds a crack, or a new install on a north-side tract home that has to meet Title 24. We handle all three. A roof replacement in Madera typically runs $9,800 – $22,000 for a standard single-family home, a repair usually lands between $350 and $2,800, and a full inspection runs $200 – $500. Call (361) 320-9467 and you will get a live person, a straight answer, and a written price before any work starts.
Why Brennan Roofing Is Madera’s Preferred Roofing Company
Madera homeowners call us because the price goes on paper before a single shingle comes off. That matters here, where a roof on an older west-side home can hide two or three layers of old material and rot nobody bid for. We walk the roof, we inspect the decking, and we write the number down. It does not move at the door. Every technician who steps onto a Madera roof is background-checked and in uniform, and you will know who is on your property before we start.
We are an independently owned and operated member of the Garrison Partners family, founded in 2000. The Garrison Standard is the same on every job in Madera: written pricing, a promised arrival window we keep, and a 365-Day Done Right Promise in writing. If a repair or install fails within one full year, we come back at no charge. A free second visit is part of the guarantee, not a favor. Travis Oakley leads the team, and he holds Madera jobs to the same code as every other roof we touch.
Dispatch and scheduling for Madera are coordinated from the brand’s Fresno, Central Valley office, so crews are local and familiar with the city’s older grid, the new subdivisions north of the 99 and east toward the high school, and everything in between.
Roof Coating in Madera
Roof coating in Madera is a practical answer for flat and low-slope roofs that take brutal sun from May through September. A reflective roof coating on a Madera home or shop typically runs $2.50 – $5.50 per square foot, installed. That usually lands between $3,000 and $9,000 for most residential flat roofs in the city. The coating seals hairline cracks, restores surface protection, and reflects enough heat to lower cooling load during those 100°F+ stretches.
When Coating Makes Sense
If your flat roof has no active leaks but the surface is cracked, chalky, or blistered from UV exposure, coating can buy years of service instead of a tear-off. We coat before the summer heat locks in, usually March through June, so the material cures clean without rain or extreme temperature swings interfering.
What Coating Covers
Coating is not a patch. It is a full surface application over properly prepared roofing: we clean, repair obvious cracks and seams, then apply the coating system evenly across the field. On Madera flat roofs with scant attic ventilation, a reflective coating also cuts surface temperature enough that homeowners notice the difference inside within a week.
Call (361) 320-9467 for a roof coating estimate in Madera. The price goes in writing before we start.
Free Roof Estimate in Madera
A free roof estimate in Madera means we come out, walk the roof, look at the decking, the flashing, the drip edge, and the ventilation, and then hand you a written line-item price. No phone-only ballparks that change later. No pressure. You get the number on paper, and it does not move unless we both agree on a change order in writing.
What the Estimate Covers
We measure the roof, count the layers, check the attic if accessible, and note condition of the decking. On an older west-side home, that often means prying up a corner to check for multiple layers of shake and composition. On a north Madera tract home, we look at flashing, underlayment condition, and whether the existing tile or shingle meets current Title 24 cool-roof requirements. The written estimate includes tear-off, disposal, new underlayment, new material, flashing, and any decking replacement we can see at the time of the estimate.
How We Handle Access
If the lot is tight, with a shared driveway or a neighbor wall a few feet off the eave, the estimate process already accounts for staging. We identify where materials and dumpster will go, and we talk through that with you before you sign. That means no surprise stop-work orders and no neighbor complaints halfway through the job.
Call (361) 320-9467 to schedule your free roof estimate in Madera.
Trusted Brands We Service in Madera
We install materials from manufacturer lines including GAF, CertainTeed, Owens Corning, IKO, Atlas, and Tamko. For Madera’s climate, we commonly recommend GAF architectural shingles for steep-slope homes and Atlas or CertainTeed for flat or low-slope roofs where heat reflectivity matters. We order directly from these manufacturers and keep common flashings, underlayment, and ridge vent components on hand so a repair in Madera does not stall for a week waiting on parts. You choose the product. We explain the differences plainly and quote it all up front.
Common Roofing Problems We See in Madera Homes
- Layered tear-offs on west-side bungalows. Homes in West Madera and off West Yosemite Avenue often carry two or three layers of old shake and composition shingles. The summer heat brittles the shake until it cracks, then winter rain finds every fissure at once.
- Hidden decking rot under old shake. When a roof has leaked slowly for years, the decking underneath is often soft or delaminated. Bidding an overlay instead of a full tear-off misses this and leaves a roof that fails within a season or two.
- Title 24 cool-roof compliance on newer tract homes. North and east Madera subdivisions built after 2005 fall under strict energy code. The wrong shingle color or tile profile fails inspection, and HOA rules often require a specific look.
- Flashing failures at penetrations. In older homes, the flashing at chimneys, vents, and skylights is often original and cooked by decades of Central Valley sun. Most leak calls we get in Madera trace back to flashing that is cracked, lifted, or missing rather than failed shingle field itself.
Pricing for Roofing Company in Madera, CA
Madera roof replacement runs $9,800 – $22,000 on a typical single-family home. Repairs land between $350 and $2,800 depending on the failure. Roof coating on a flat roof runs $3,000 – $9,000. Full inspections run $200 – $500. The big swing factor in Madera is tear-off depth: an older west-side home with two or three layers of shake and composition needs more labor, more disposal, and more decking inspection than a single-layer north Madera tract home. Access also matters, and a tight lot with no staging area adds cost that a wide suburban driveway does not. We write all of this down before work begins, and that number is fixed. Call (361) 320-9467 for your exact quote. Estimates are free.
We Also Serve Cities Near Madera
Our Roofing Company team works throughout the Central Valley. Beyond Madera, we regularly serve homeowners in Fresno, Clovis, Kerman, and Chowchilla. The same written pricing, same background-checked crews, and same 365-Day Done Right Promise apply on every job, in every one of these cities.
Serving Madera, CA - Our Local Coverage Area
We’re based in the Madera area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roofing Company in Madera
Yes, City of Madera requires a re-roof permit for replacement. On older downtown and west-side homes, the permit can also trigger design review if the property sits within an overlay district with historic guidelines, which may restrict visible roof material or color. We pull the permit, we handle the submittals, and we flag any overlay-district review before you commit. Call (361) 320-9467 and we will check your specific property.
We stage materials and dumpster placement before we start, and we walk the site with you and, when needed, the adjacent property owner. On tight lots with shared driveways, we keep the work path clear and date-stamp every access plan. The goal is simple: the job gets done without blocking a neighbor’s driveway or triggering a stop-work complaint. The staging plan is part of the written estimate.
We will not re-roof over multiple layers in Madera. The older the shake, the more brittle it becomes in summer heat, and overlaying hides rot at the decking instead of fixing it. We tear off to the deck, inspect the sheathing, replace anything compromised, and install a single new roof system. The quote includes full tear-off and disposal, so nothing surfaces later. Call (361) 320-9467 for a written estimate that reflects the full scope.
For steep-slope homes we recommend architectural asphalt shingles in a cool-roof rated color, usually GAF or CertainTeed lines, which meet Title 24 reflectivity when specified correctly. For flat or low-slope roofs, a reflective single-ply membrane or a roof coating system handles both heat and code. We explain the options in plain language and quote each one separately. Call (361) 320-9467 and we will walk your roof with you.
We inspect first, and we price for full tear-off from the beginning. Tight access means we plan for hand-carrying or a smaller dumpster on the street with a permit, and that labor is included in the written quote. There is no low first number that grows at the door. The price covers access, tear-off, disposal, and any visible decking failure. Call (361) 320-9467 for an exact quote. Estimates are free.
We tore off two layers of failed wood shake and one layer of worn composition on a 1940s bungalow off West Yosemite Avenue in West Madera. The first winter rains had cracked the brittle shake, and water was showing at the ceiling. Our crew replaced damaged decking, laid ice and water shield in the valleys, set new flashing at every penetration, and finished with GAF architectural shingles and a ridge vent. The homeowner said the house felt cooler that summer and the leak never returned. That is the standard we hold on every Madera roof.
Written by Travis Oakley, Owner at Brennan Roofing, serving Madera.






Before
After
Before
After
Before
After