Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
GAF Roofing in Fort Lauderdale, CA | Brennan Roofing
Our Fort Lauderdale Roofing Company provides independent GAF roofing service across the area: shingle replacement, flashing repair, decking replacement, and full roof replacements using GAF Timberline and EverGuard product lines. The one thing that makes our GAF work different here is that we build every roof to High-Velocity Hurricane Zone standards while also accounting for the salt-air corrosion that eats flashing and fasteners east of Federal Highway. We’re not authorized or endorsed by GAF, and we won’t pretend otherwise. Call (361) 320-9467 for a written estimate before any work begins.
Why Fort Lauderdale Residents Choose Us for GAF Service
Travis Oakley, our owner, trained in building construction technology at Los Angeles Trade-Technical College and spent the better part of two decades doing production and repair work before founding Brennan Roofing. That background matters when you hand over a GAF roof in Fort Lauderdale, because this city doesn’t test roofs gently. Hurricane winds, year-round UV, and salt off the Atlantic combine to punish shingle adhesives, flashing, and fasteners in ways a contractor from inland Florida simply won’t see. We work with GAF product lines like Timberline HDZ, Timberline UHDZ, Timberline AS II, and EverGuard TPO alongside Owens Corning and CertainTeed, so our recommendations aren’t bound to one brand’s catalog. Every job starts with a written price on paper. Every technician is background-checked and in uniform. And every repair and installation carries our 365-Day Done Right Promise in writing for one full year.
Common GAF Roofing Problems We Solve in Fort Lauderdale
- Granule loss on GAF Timberline shingles. Year-round South Florida UV and heat bake shingle surfaces, causing granule loss that exposes asphalt and shortens service life. We see this constantly on 10- to 15-year-old Timberline roofs in Fort Lauderdale. The granules don’t just wash off for no reason; the shingle’s protective layer is literally cooking away.
- Corroded GAF flashing and fasteners near the coast. East of Federal Highway, salt spray from the Atlantic and Intracoastal accelerates metal corrosion. We routinely replace flashing at chimneys, skylights, and valleys where rusted fasteners created leak paths into the decking. A shingle can be fine while the metal holding it in place rots out underneath.
- Wind uplift after named storms. When edge metal and starter strips were not upgraded to High-Velocity Hurricane Zone requirements, shingle fields peel up along eaves and rakes. We repair the uplift zone and bring the edge detail into compliance so the next storm doesn’t finish the job.
- Adhesive strip failure on architectural shingles. GAF’s architectural lines rely on sealant strips to lock shingles together. Without proper high-wind nailing patterns or polymer-modified sealants, those strips loosen and shingles blow off in gusts. Fort Lauderdale’s afternoon thunderstorms will find that weakness fast.
- Leaking pipe boots and vent flashing. The rubber and metal components around roof penetrations degrade faster in salt air. A 1960s ranch in Fort Lauderdale with original boots will leak eventually, even if the shingles above look serviceable.
GAF Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment
Fort Lauderdale’s 40-year recertification requirement for older buildings is the quiet force driving a lot of GAF roof replacements here. We see it most often on 1960s-era condos and ranch homes near the beach, where a GAF-clad roof that might otherwise limp along gets flagged during inspection because salt-air degradation of flashing and fasteners puts it out of compliance with current High-Velocity Hurricane Zone code. In the Coral Ridge neighborhood, for example, we’ve inspected GAF Timberline roofs where the shingles looked worn but serviceable from the ground, yet the fasteners underneath were so corroded that the roof could not be brought into compliance without full replacement. Repair stops being an option when the inspector’s checklist says the assembly no longer meets wind-uplift standards. That is the reality of GAF service in Fort Lauderdale: the city’s environment forces decisions that other Florida markets can postpone. GAF sales & service work here means documenting what we find, because insurance carriers and building departments will want that paperwork.
GAF Models & Products We Service in Fort Lauderdale
We install and repair GAF Timberline HDZ, Timberline UHDZ, Timberline AS II, and EverGuard TPO systems. For repairs, we use GAF-manufactured components and accessories when they’re available and cost-effective: shingles, ridge caps, starter strips, and underlayments. We’re not limited to GAF’s catalog, though. Where aftermarket underlayments, flashing, or fasteners meet Florida Building Code and wind-uplift requirements better than the OEM part, we specify those and explain why. What we stock locally for fast Fort Lauderdale turnaround depends on the job: common Timberline colors and EverGuard TPO membrane are usually available within days, while custom flashing is fabricated to spec. We serve the whole Fort Lauderdale service area with the same parts discipline every time.
GAF Service Pricing in Fort Lauderdale
Shingle replacement on a GAF roof in Fort Lauderdale typically runs $2.50 to $4.00 per square foot, depending on how much decking needs replacing. Flashing repair at chimneys, valleys, or pipe boots usually falls between $450 and $1,200 per penetration. Roof decking replacement adds $2.00 to $3.50 per square foot when sheathing has rotted from trapped moisture. Full GAF replacements here run higher than inland Florida because High-Velocity Hurricane Zone fastening schedules and corrosion-resistant materials add labor and component cost. What drives your number: total square footage, roof pitch, decking condition, and whether flashing and edge metal need upgrading to current code. A free estimate from us includes a written line-item price before any work starts, and that price does not move at the door. Call (361) 320-9467 for an exact quote on your GAF roof in Fort Lauderdale.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – GAF Roofing in Fort Lauderdale
Yes. Fort Lauderdale sits inside the High-Velocity Hurricane Zone under the Florida Building Code, so any GAF shingle roof replacement or significant repair must meet wind-uplift fastening schedules, enhanced edge metal, and approved underlayment standards. Repairs that don’t meet HVHZ requirements can fail inspection and complicate insurance claims. Call (361) 320-9467 to have us assess whether your current roof complies.
Salt air corrodes metal fasteners, flashing, and pipe boots faster than in inland locations, especially east of Federal Highway in Fort Lauderdale. The shingles themselves hold up, but the components holding them down degrade and create leak paths. We recommend inspection every two to three years for coastal GAF roofs so we can replace failing fasteners before the decking rots. Call (361) 320-9467 to schedule one.
Isolated storm damage: Fort Lauderdale Roof Repair is the right call. Widespread granule loss, salt-air corrosion, or failed adhesive strips across multiple shingle fields: replacement is usually the honest answer. Fort Lauderdale’s 40-year recertification process often makes that call for older roofs. Call (361) 320-9467 and we’ll inspect with a written report either way.
Get a tarp on it quickly, document everything with photos, and call your insurance carrier, then call us at (361) 320-9467. We handle emergency tarping and the repair or replacement work that follows, and we document the damage in the format adjusters in Fort Lauderdale expect.
When GAF components are available, cost-effective, and the right fit for the assembly, yes. We also specify quality aftermarket underlayments, flashing, and fasteners when those meet Florida Building Code and wind-uplift requirements better than OEM. You get the part that works, not the part that matches a brand sticker. Call (361) 320-9467 and we’ll explain what your roof actually needs.
Service Areas Near Fort Lauderdale
Brennan Roofing serves Fort Lauderdale and surrounding communities. We also cover GAF service in Glendale and GAF service in Ontario for clients with properties across California. If you’re in one of those areas, we bring the same written pricing and 365-Day Done Right Promise to every job.
Book Your GAF Service in Fort Lauderdale Today
If your GAF roof needs attention in Fort Lauderdale, call (361) 320-9467. We’ll schedule a free estimate, put the price on paper before any work begins, and stand behind the job for a full year in writing. A roof that’s squared away doesn’t need a sales pitch.
Written by Travis Oakley, Owner at Brennan Roofing, serving Fort Lauderdale since founding the company on a straightforward idea: show up on time, use materials worth putting your name on, and never hand a homeowner a bill that surprises them.






Before
After
Before
After
Before
After